problem-贝斯特app客户端下载

service

what details should be paid attention to in the operation of the shearing machine
release time:2020年9月7日    publisher: hangli heavy industry

when cnc cutting pays attention to details:

1. at the beginning of the preparation to operate on the shearing machine, check all parts without abnormalities, and the fastening screws (caps) must not be loosened. the brakes should generally be reliable.

2. strictly adjust the distance according to the thickness of the cylinder paper, and don't overwork. the mechanical properties cannot be restored. the pressure of the workpiece exceeds the predetermined range.

2. operation precautions

1. must be placed in a smooth position of the workpiece immediately

1. check all parts without abnormalities, and the fastening screws (caps) must not be loosened. the brakes should generally be reliable.

2. adjust the distance strictly according to the thickness of the cylindrical paper, and don't overload work. the mechanical properties of uncut (curled) workpieces beyond the specified range.

2. operation precautions

1. it must be placed in a stable position of the workpiece. it should be a clear signal for the person driving after the operation is running, which specifies a command.

2. both hands should not be placed on the cold-rolled steel plate, and the use of model inspection is allowed. after the model inspection, the machine is allowed to shut down.

3. when the scissors (curl) is enough for a complete circle, at the end of the rolling plate, a certain margin is allowed to prevent the workpiece from falling.

4. when working, the workpiece is forbidden to stand, and the cylinder on the circle is not found to have good rolling.

5. for hot-rolled thick, larger cylinders or a larger piece of material, the pneumatic tool should move the roller and roll it again and again to form a small drop.

6. for cold-rolled narrow drums, the shearing machine manufacturer should place it on the drum and roll it in the middle.

7. after the workpiece enters the roll, prevent hands and clothes from participating in the roll.

three, the matters needing attention stop

1. when the machine operator finds abnormal sound of the shearing machine, he should stop the machine immediately for inspection, adjustment and repair.

2. isolating switch, disconnect the power supply.

3. after the designated place where the workpiece stops.